Difference between revisions of "CLI-01 input/output module"

From CANopen-Lift
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[de:Ein-/Ausgangsplatine_CLI-01]]
 
[[de:Ein-/Ausgangsplatine_CLI-01]]
 
= Manufacturer =
 
= Manufacturer =
[[File:Logo_Elfin.jpg|right|200px|ELFIN GmbH]]
+
[[File:Logo_Elfin.jpg|right|200px|ELFIN Technology GmbH]]
[[ELFIN GmbH]]
+
[[ELFIN Technology GmbH]]
  
 
= Profil =
 
= Profil =
Line 15: Line 15:
  
 
= Description =
 
= Description =
Das Modul CLI-01 verfügt über 8 Rufklemmen (Ein- und Ausgangsklemme) und beinhaltet die virtuellen Geräte ''Input Panel Unit'' und ''Output Panel Unit''. Damit können beliebige Eingangssignale eingelesen werden und als Eingangsfunktion auf dem CAN-Bus bereitgestellt bzw. Ausgangssignale vom Bus ausgegeben werden.  Die Anzahl der Ein- und Ausgänge lässt sich jeweils um 8 weitere I/Os mit der Platine LIO-01 erweitern.  
+
The modul CLI-01 provides 8 call terminals (inputs and outputs) and provides the virtual devices ''input panel unit'' and ''output panel unit''. It can be used to read in all input signals and provide it on the CAN bus or set the output signal form the bus. Using the module LIO-01 the amount of inputs and outputs can be expanded up to 120 I/Os.  
  
Das Haupteinsatzgebiet der Baugruppe CLI-01 ist der Anschluss von Signalen in Steuerungen, auf der Kabine sowie in Innen- und Außentableaus von Aufzügen.
+
The main application field of the CLI-01 module is the lift industry to provide signals of the controller, on the car and of landing panels and car panels.
  
 
= State =
 
= State =

Latest revision as of 18:00, 28 March 2020

Manufacturer

ELFIN Technology GmbH

ELFIN Technology GmbH

Profil

CiA-417

Interface

  • transceiver ISO 11898 conform (bus proof voltage +/- 30 V)
  • bitrate and -timing CiA-301 conform
  • galvanic insulated
  • connector: open style with 3 contacts
  • termination with a resistor via internal DIL switch

Description

The modul CLI-01 provides 8 call terminals (inputs and outputs) and provides the virtual devices input panel unit and output panel unit. It can be used to read in all input signals and provide it on the CAN bus or set the output signal form the bus. Using the module LIO-01 the amount of inputs and outputs can be expanded up to 120 I/Os.

The main application field of the CLI-01 module is the lift industry to provide signals of the controller, on the car and of landing panels and car panels.

State

in development

Picture

CLI-01 with 8 free programmable inputs/outputs/calls

CLI-01 with 8 free programmable inputs/outputs/calls

CLI-01 with extention LIO-01 with 16 free programmable inputs/outputs/calls

CLI-01 with extention LIO-01 with 16 free programmable inputs/outputs/calls