Difference between revisions of "Interlift 2019"

From CANopen-Lift
Jump to navigation Jump to search
Line 3: Line 3:
  
 
= CANopen Lift on the Interlift 2019 =
 
= CANopen Lift on the Interlift 2019 =
[[File:2017-10_CANopen_Products_Frenic_Fuji Electric Europe.jpg|thumb|CANopen-Lift products at a manufacturer]]
+
[[File:2017-10_CANopen_Produkte_Frenic_Fuji Electric Europe.jpg|thumb|CANopen-Lift products at a manufacturer]]
 
In 2019 CAN in Automation (CiA) was once again represented with a stand at the Interlift to give visitors an understanding of the CANopen-Lift standard.  
 
In 2019 CAN in Automation (CiA) was once again represented with a stand at the Interlift to give visitors an understanding of the CANopen-Lift standard.  
  

Revision as of 10:51, 3 May 2020

CiA-Stand Interlift2017 1050px.jpg

CANopen Lift on the Interlift 2019

CANopen-Lift products at a manufacturer

In 2019 CAN in Automation (CiA) was once again represented with a stand at the Interlift to give visitors an understanding of the CANopen-Lift standard.

A lot has happened since the last Interlift 2017. The number of members has increased and many new products have been equipped with a CANopen interface.

New demonstrators

File:2017-10 new CANopen Demonstrator Thor.jpg
a new demonstrator from Thor Engineering next to the old one at the CiA booth

In 2015 some products were presented for the first time with the new CANopen-Lift demonstrators. These offer many advantages over the 'old' demonstrators. With the help of the flexyPage Displays installed there, sensor data can be displayed directly and the function of the products can be attractively demonstrated using multimedia elements. This concept was very well received by the visitors and will be further developed.

At the Interlift 2017 there was repeated feedback from visitors that the old demonstrators were no longer up to date and should be updated. The Marketing Group Lift has created a new concept and exhibited it for the first time at Interlift 2019.


CANopen-Lift Products on the manufacturers stand

At the Interlift 2019 again CANopen-Lift will be represented with its own booth to inform visitors about the standard CANopen-Lift. Since the last Interlift 2017 a lot has happened. The number of members has risen and plenty of new products have been equipped with a CANopen interface. This trend could also be observed on the Interlift 2017.

New demonstrators

a new demonstrator of the company Thor Engineering at the CiA stand

In 2015 for the first time some of the new products were presented with the new CANopen demonstrators. These offer many advantages over the ‘old’ demonstrators. With the help of the installed flexyPage displays, sensor data can be visualised directly and the function of the products can be displayed appealingly via multimedia elements. This concept was received very well by the visitors.

At Interlift 2017, visitors have repeatedly given feedback that the old demonstrators are outdated and should be updated. The Marketing Group Lift will discuss this in the upcoming meetings.

There will be many new and familiar CANopen products at the stands of many manufacturers. We provide a list in this wiki on time before the Interlift 2019.

Exhibitors of CANopen-Lift products at Interlift 2019

In the following table you will find an overview of the CiA member stands or stand with CANopen-Lift products.

Overview table of exhibitors
Hall Booth-No. Company Product group W Comment


  • A: Exhibitors with their own stands at the Interlift
  • P: A CANopen product is either being produced, developed or sold
  • D: A product is shown at the demonstrator
  • M: Member of CAN in Automation
  • I: Here you receive information about CANopen-Lift

Review of the last trade fairs