SafeLine IO Boards

From CANopen-Lift
Revision as of 13:15, 29 January 2019 by Jonas.Tomasson (talk | contribs)
Jump to navigation Jump to search

SafeLine IO Boards

Don't change the CPU-board just get the extra connections you need. With SafeLine's IO-boards you can get what you need, the way you want it – in an easy way. Extra connections in a cost-effective way.


IO8-CAN

IO8-CAN
IO8-CAN

IO8-CAN-CL is a voice announcer and signal handling board for the CANopen-Lift bus system, available with JST connections and screw terminal. Available with or without DIN-rail mounting.

If an IO8-CAN is powered up with an empty Micro SD card inserted, the unit will automatically copy the complete configuration onto the memory card. This enables the configuration to be transferred and copied between units with minimum effort. (Please note that this does not apply for audio files, as they are never stored in the unit's internal memory).

The unit's JST contacts ensures a quick installation. One CAN communication cable and one input/output cable is included. Please note that additional cables (*CABLE10) is needed when more than one input/output is used.

IO8-CAN-CL is mounted on a DIN rail.

IO4-CAN

IO8-CAN
IO8-CAN

The IO4-CAN is a simple and convenient solution for handling signals, such as landing calls

Up to four configurable input/outputs can be used. Utilizes the CANopen-Lift protocol. Unlike IO4-CAN-CL, inputs/outputs use the screw terminal for connections.

Configuration is made with the CANopen-Lift software CANwizard. The two included DIN rail holders allows for easy installation. A cable (*CABLE09) with JST connector is also included for the CAN communication. The unit's detachable memory chip (EEPROM) allows the configuration to be easily moved between two IO4-CANs.


CANopen Products

All SafeLine's CANopen-Lift products

Contact

SafeLine Group
Antennvägen 10
135 48 Tyresö
Sweden
Phone: +46 (8) 447 79 32
info@safeline.se
Website: [1]