CANopen-Lift - User contributions [en]

LM-CANopen with display

2017-01-18T13:36:02Z

Alberto Ruiz: /* Description */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:Micelect-lm-canopen_display_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen with display control unit can be used with all load weighin sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:micelect-lm-canopen_display_features.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lm-canopen-display-micelect.html micelect.es/LM-CANopen-with-display]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:22:05Z

Alberto Ruiz: /* Link */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:Micelect-lm-canopen_display_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen with display control unit can be used with all load weighin sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:micelect-lm-canopen_display_features.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lm-canopen-display-micelect.html micelect.es/LM-CANopen-with-display]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:19:35Z

Alberto Ruiz: /* Description */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:Micelect-lm-canopen_display_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen with display control unit can be used with all load weighin sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:micelect-lm-canopen_display_features.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:17:36Z

Alberto Ruiz: /* Description */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:Micelect-lm-canopen_display_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:micelect-lm-canopen_display_features.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

File:Micelect-lm-canopen display xopt.png

2017-01-18T13:16:42Z

Alberto Ruiz: New MICELECT's LM-CANopen with display control unit.

New MICELECT's LM-CANopen with display control unit.

LM-CANopen with display

2017-01-18T13:15:22Z

Alberto Ruiz: /* Picture */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:LM-CAN_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:micelect-lm-canopen_display_features.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:13:50Z

Alberto Ruiz: /* Description */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:LM-CAN_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:Features_xopt.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

File:Micelect-lm-canopen display features.png

2017-01-18T13:10:49Z

Alberto Ruiz: List of features of new LM-CANopen with display control unit of MICELECT.

List of features of new LM-CANopen with display control unit of MICELECT.

LM-CANopen with display

2017-01-18T13:08:41Z

Alberto Ruiz: /* Interface */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3
*LCD and buttons to view and set all CANopen and manufacturer parameters.

= Description =
[[File:LM-CAN_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:Features_xopt.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:07:36Z

Alberto Ruiz: /* Description */

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3

= Description =
[[File:LM-CAN_xopt.png|thumb|LM-CANopen]]
The new universal LM-CANopen control with display unit can be used with all sensors manufactured by MICELECT.

This unit uses CANopen® communications protocol and its calibration and configuration is very easy.
8 to 16 inputs models available.

We make different versions with CAN propietary protocol too.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box.
* 8 inputs.
* 16 inputs.
* CAN propietary protocol.

STANDARD FEATURES:
* CANopen® communications according to Cia 417.
* Compatible with all load weighing sensors manufactured by MICELECT.
* Up to 16 individual sensor measures.
* High sampling speed.
* Non-connection sensor detection (EMCY codes).
* CAN-bus connection: DS 303-1 (Open Style Connector or 9-pin D-sub connector).
* LEDs indicate the status of the node according to DS 303-3.
* CANopen alarms:
- Zero-Load.
- Normal-Load.
- Full-Load.
- Overload.
- Slack rope.
- Difference of rope.
* LCD and buttons to view and set all CANopen and manufacturer parameters.
* Update firmware button through CANBus connector (with PCAN adapter).

ELECTRICAL FEATURES:
* LEDs indicating the status of the node (DS 303-3).
* 2.5 kV rms signal and power isolated CAN transceiver.
* isoPower integrated isolated dc-to-dc converter.
* Complies with ISO 11898 standard High speed data rates of up to 1 Mbps.
* High common-mode transient immunity: >25 kV/μs.
* DIP switch 120Ω termination resistor.
* Update firmware button through CANBus connector (with PCAN adapter).

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:Features_xopt.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

LM-CANopen with display

2017-01-18T13:00:01Z

Alberto Ruiz: Created page with "Micelect = Manufacturer = Micelect = Profile = CiA-417 = Interface = *Open Style connector according to DS 303-1 *LEDs indicating the s..."

[[File:Logo_Micelect.png|thumb|Micelect]]

= Manufacturer =
[[Micelect]]

= Profile =
CiA-417

= Interface =
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3

= Description =
[[File:LM-CAN_xopt.png|thumb|LM-CANopen]]
LM-CANopen is an excellent electronic control unit with CANopen output compatible with all sensors manufactured by MICELECT.

The unit uses CANopen communications protocol. Its calibration and configuration are very easy.

MODELS:
* DIN-rail.
* In a IP 65-rated plastic box

STANDARD FEATURES:
*CANopen® communications
*Compatible with all sensors manufactured by MICELECT
*Open Style connector according to DS 303-1
*LEDs indicating the status of the node according to DS 303-3

ELECTRICAL FEATURES:
*Power supply voltage 24Vdc
*Communications CANopen®
*Open Style connectors DS 303-1
*LEDs indicating the status of the node DS 303-3

MECHANICAL FEATURES:
*Weight 1Kg

TEMPERATURE FEATURES:
*Operating temperature -10ºC / 50ºC

OPTIONS 
Isolated option
*2.5 kV rms signal and power isolated CAN transceiver
*isoPower® integrated isolated dc-to-dc converter
*Complies with ISO 11898 standard
*High speed data rates up to 1 Mbps
*Slope Control for reduced EMI
*Thermal shutdown protection
*High common-mode transient immunity: >25 kV/μs
*UL recognition
*2500 V rms for 1 minute per UL 1577

Non isolated option:
*Fully ISO 11898-2:2003 compliant
*Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
*Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
*Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)

= Status =
Available

= Picture =
[[File:Features_xopt.png]]
[[File:OPTION_LM_xopt.png|top]]

= Link =
[http://www.micelect.es/en/see-systems/canopen-systems/lmcanopen-load-weighing-devices-for-elevators.html micelect.es/LM-CANopen]

[[Category: Products CiA-417]]

Micelect

2017-01-18T12:54:05Z

Alberto Ruiz: /* CANopen-Products */

[[de:Micelect]]
= Description =

Micelect is a Spanish company with a high level of international prestige which is dedicated to high levels of technology and innovation, specialising in the design, manufacturing and commercialisation of electronic load weighing devices for lifts.

= CANopen-Products =
* Weight measurement sensor [[ILC-CANopen|ILC-CANopen]]
* Weight measurement control unit [[LM-CANopen|LM-CANopen]]
* New weight measurement control unit with display [[LM-CANopen with display|LM-CANopen with display]]

= Contact =
[[File:Logo_Micelect.png|right|200px|Micelect]]
:'''Micelect'''
:C/ Otoño, Nº 23
:Parque Industrial "Las Monjas"
:Torrejón de Ardoz
:Madrid 28850
:Spain
:Phone: +34 91 660 03 47
:[http://www.micelect.es/en www.micelect.es]

[[Category: Developer]]
[[Category: Manufacturer]]

User talk:Alberto Ruiz

2016-06-29T11:16:04Z

Alberto Ruiz:

<div style="display:none;"></div>

== '''Plug fest 12th CiA® 417 (2016-04-12)''' ==

In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience and exchange ideas. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

As software developer, I think that the CANopen implementations are the future of the technologies. Every time, all parameters are controlled, all devices can communicate between them, there is no limitations in the control. EVERYTHING ARE PREDEFINED!!!!

User:Alberto Ruiz

2016-06-29T11:15:24Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-29T11:14:54Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T12:18:11Z

Alberto Ruiz: /* currently at work */

User talk:Alberto Ruiz

2016-06-10T12:17:37Z

Alberto Ruiz:

<div style="display:none;">

== '''Plug fest 12th CiA® 417 (2016-04-12)''' ==

In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience and exchange ideas. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

As software developer, I think that the CANopen implementations are the future of the technologies. Every time, all parameters are controlled, all devices can communicate between them, there is no limitations in the control. EVERYTHING ARE PREDEFINED!!!!

</div>

User talk:Alberto Ruiz

2016-06-10T12:15:20Z

Alberto Ruiz:

User talk:Alberto Ruiz

2016-06-10T12:14:45Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T12:07:07Z

Alberto Ruiz:

User talk:Alberto Ruiz

2016-06-10T12:06:08Z

Alberto Ruiz:

User talk:Alberto Ruiz

2016-06-10T12:04:22Z

Alberto Ruiz:

User talk:Alberto Ruiz

2016-06-10T12:04:04Z

Alberto Ruiz: /* Article */

User talk:Alberto Ruiz

2016-06-10T12:03:23Z

Alberto Ruiz: Created page with "== Article == '''Plug fest 12th CiA® 417 (2016-04-12)''' In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfactu..."

== Article ==

'''Plug fest 12th CiA® 417 (2016-04-12)'''

In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience and exchange ideas. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

User:Alberto Ruiz

2016-06-10T12:03:11Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T12:02:36Z

Alberto Ruiz:

<div style="display:none;">

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT S.L] as Software developer and Mechanical designer.

During years, we have been developing Load weighing device units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. Several times, the control units had been tested in PlugFest join some control device manufacturers ([[Böhnke & Partner GmbH]],[[Kollmorgen Steuerungstechnik GmbH]], [[Sprinte SAS]], [[Weber Lifttechnik GmbH]]...). The results were satisfactory. A long the years, we have improved our products adapting it to the standard protocol, even we have propose improvements in the protocol to try standardize all load weighing device settings.

If you have any question, please do not hesitate contact me.

== Contact ==
'''[http://www.micelect.com MICELECT S.L]'''

&emsp;Alberto Ruiz

&emsp;aruiz@micelect.com

&emsp;[https://goo.gl/maps/4hrsGXXE9mA2 Torrejon de Ardoz 28850]
&emsp;&emsp;C/ Otoño 23 P.I. Las Monjas

&emsp;[https://goo.gl/maps/gFxFA6SfR152 Torres de la Alameda 28813]
&emsp;&emsp;C/ Berlin 14 P.I. Renault

&emsp;Spain

&emsp;Phone.: +34 91 660 03 47

== currently at work==

* [[LM-CANopen]] 2016 (NEW Product)

* [[LM-CANopen]]

* [[ILC-CANopen]]

*

== Article ==

'''Plug fest 12th CiA® 417 (2016-04-12)'''

In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience and exchange ideas. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

</div>

User:Alberto Ruiz

2016-06-10T12:02:12Z

Alberto Ruiz: /* Article */

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT S.L] as Software developer and Mechanical designer.

During years, we have been developing Load weighing device units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. Several times, the control units had been tested in PlugFest join some control device manufacturers ([[Böhnke & Partner GmbH]],[[Kollmorgen Steuerungstechnik GmbH]], [[Sprinte SAS]], [[Weber Lifttechnik GmbH]]...). The results were satisfactory. A long the years, we have improved our products adapting it to the standard protocol, even we have propose improvements in the protocol to try standardize all load weighing device settings.

If you have any question, please do not hesitate contact me.

== Contact ==
'''[http://www.micelect.com MICELECT S.L]'''

&emsp;Alberto Ruiz

&emsp;aruiz@micelect.com

&emsp;[https://goo.gl/maps/4hrsGXXE9mA2 Torrejon de Ardoz 28850]
&emsp;&emsp;C/ Otoño 23 P.I. Las Monjas

&emsp;[https://goo.gl/maps/gFxFA6SfR152 Torres de la Alameda 28813]
&emsp;&emsp;C/ Berlin 14 P.I. Renault

&emsp;Spain

&emsp;Phone.: +34 91 660 03 47

== currently at work==

* [[LM-CANopen]] 2016 (NEW Product)

* [[LM-CANopen]]

* [[ILC-CANopen]]

*

== Article ==

'''Plug fest 12th CiA® 417 (2016-04-12)'''

In the 12th Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience and exchange ideas. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

</div>

User:Alberto Ruiz

2016-06-10T11:55:40Z

Alberto Ruiz:

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT S.L] as Software developer and Mechanical designer.

During years, we have been developing Load weighing device units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. Several times, the control units had been tested in PlugFest join some control device manufacturers ([[Böhnke & Partner GmbH]],[[Kollmorgen Steuerungstechnik GmbH]], [[Sprinte SAS]], [[Weber Lifttechnik GmbH]]...). The results were satisfactory. A long the years, we have improved our products adapting it to the standard protocol, even we have propose improvements in the protocol to try standardize all load weighing device settings.

If you have any question, please do not hesitate contact me.

== Contact ==
'''[http://www.micelect.com MICELECT S.L]'''

&emsp;Alberto Ruiz

&emsp;aruiz@micelect.com

&emsp;[https://goo.gl/maps/4hrsGXXE9mA2 Torrejon de Ardoz 28850]
&emsp;&emsp;C/ Otoño 23 P.I. Las Monjas

&emsp;[https://goo.gl/maps/gFxFA6SfR152 Torres de la Alameda 28813]
&emsp;&emsp;C/ Berlin 14 P.I. Renault

&emsp;Spain

&emsp;Phone.: +34 91 660 03 47

== currently at work==

* [[LM-CANopen]] 2016 (NEW Product)

* [[LM-CANopen]]

* [[ILC-CANopen]]

*

== Article ==

'''Plug fest 12th CiA® 417 (2016-04-12)'''

In the last Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience. From my point of view, this moment is very important in the developing process of a product, you can test quickly the device, which you were working a lot time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the control device developers.

User:Alberto Ruiz

2016-06-10T11:53:54Z

Alberto Ruiz:

<div style="display:none;">

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT S.L] as Software developer and Mechanical designer.

During years, we have been developing Load weighing device units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. Several times, the control units had been tested in PlugFest join some control device manufacturers ([[Böhnke & Partner GmbH]],[[Kollmorgen Steuerungstechnik GmbH]], [[Sprinte SAS]], [[Weber Lifttechnik GmbH]]...). The results were satisfactory. A long the years, we have improved our products adapting it to the standard protocol, even we have propose improvements in the protocol to try standardize all load weighing device settings.

If you have any question, please do not hesitate contact me.

== Contact ==
'''[http://www.micelect.com MICELECT S.L]'''

&emsp;Alberto Ruiz

&emsp;aruiz@micelect.com

&emsp;[https://goo.gl/maps/4hrsGXXE9mA2 Torrejon de Ardoz 28850]
&emsp;&emsp;C/ Otoño 23 P.I. Las Monjas

&emsp;[https://goo.gl/maps/gFxFA6SfR152 Torres de la Alameda 28813]
&emsp;&emsp;C/ Berlin 14 P.I. Renault

&emsp;Spain

&emsp;Phone.: +34 91 660 03 47

== currently at work==

* [[LM-CANopen]] 2016 (NEW Product)

* [[LM-CANopen]]

* [[ILC-CANopen]]

*

== Article ==

Plug fest 12th CiA® 417 (2016-04-12)

In the last Plug fest, a lot of companies were testing their products with the differents control device manunfacturers.
I do think, it is a very good experience. From my point of view, this moment s very important in the process of developing for a product, you can test quickly your device, which you were working a lot from time ago, and you can see an error that you could not simulate in your laboratory "It is a turning point". A lot of ideas are comming, and you can discuss these directly with the controllers developers.

</div>

User:Alberto Ruiz

2016-06-10T11:36:05Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:34:15Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:21:22Z

Alberto Ruiz: /* Products */

User:Alberto Ruiz

2016-06-10T11:19:43Z

Alberto Ruiz: /* Contact */

User:Alberto Ruiz

2016-06-10T11:17:38Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:16:56Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:14:41Z

Alberto Ruiz: /* Products */

User:Alberto Ruiz

2016-06-10T11:10:37Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:05:28Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:04:45Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:03:09Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T11:00:53Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T10:59:56Z

Alberto Ruiz: /* Contact */

User:Alberto Ruiz

2016-06-10T10:59:24Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T10:59:00Z

Alberto Ruiz:

User:Alberto Ruiz

2016-06-10T10:58:12Z

Alberto Ruiz: /* Contact */

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT] as Software developer and Mechanical designer.

During years, we have been developing Load meassurement units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. We have tested it in PlugFest on several times. The results have been satisfactory.

If you have any question, please do not hesitate contact me.

== Contact ==

&emsp;Alberto Ruiz

&emsp;aruiz@micelect.com

&emsp;C/ Otoño 23 P.I. Las Monjas

&emsp;Torrejon de Ardoz 28850

&emsp;C/ Berlin 14 P.I. Renault

&emsp;Torres de la Alameda 28813

&emsp;&emsp;SPAIN

&emsp;Phone.: +34 91 660 03 47

User:Alberto Ruiz

2016-06-10T10:54:39Z

Alberto Ruiz:

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT] as Software developer and Mechanical designer.

During years, we have been developing Load meassurement units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. We have tested it in PlugFest on several times. The results have been satisfactory.

If you have any question, please do not hesitate contact me.

== Contact ==

Alberto Ruiz

aruiz@micelect.com

C/ Otoño 23 P.I. Las Monjas

Torrejon de Ardoz 28850

C/ Berlin 14 P.I. Renault

Torres de la Alameda 28813

SPAIN

Phone.: +34 91 660 03 47

User:Alberto Ruiz

2016-06-10T10:54:06Z

Alberto Ruiz:

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT] as Software developer and Mechanical designer.

During years, we have been developing Load meassurement units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. We have tested it in PlugFest on several times. The results have been satisfactory.

If you have any question, please do not hesitate contact me.

== Contact ==

Alberto Ruiz

aruiz@micelect.com

C/ Otoño 23 P.I. Las Monjas
Torrejon de Ardoz 28850

C/ Berlin 14 P.I. Renault

Torres de la Alameda 28813

SPAIN

Phone.: +34 91 660 03 47

User:Alberto Ruiz

2016-06-10T10:52:58Z

Alberto Ruiz:

<div style="display:none;"></div>

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT] as Software developer and Mechanical designer.

During years, we have been developing Load meassurement units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. We have tested it in PlugFest on several times. The results have been satisfactory.

If you have any question, please do not hesitate contact me.

== CONTACT ==

Alberto Ruiz
aruiz@micelect.com

Torrejon de Ardoz 28850
C/ Otoño 23 P.I. Las Monjas

Torres de la Alameda 28813
C/ Berlin 14 P.I. Renault

SPAIN

Phone.: +34 91 660 03 47

User:Alberto Ruiz

2016-06-10T10:52:43Z

Alberto Ruiz:

<div style="display:none;">

My name is Alberto Ruiz, I work at [http://www.micelect.com MICELECT] as Software developer and Mechanical designer.

During years, we have been developing Load meassurement units according [http://www.can-cia.org/can-knowledge/canopen/cia417/ CiA® 417 series: Profile for lift control systems]. We have tested it in PlugFest on several times. The results have been satisfactory.

If you have any question, please do not hesitate contact me.

== CONTACT ==

Alberto Ruiz
aruiz@micelect.com

Torrejon de Ardoz 28850
C/ Otoño 23 P.I. Las Monjas

Torres de la Alameda 28813
C/ Berlin 14 P.I. Renault

SPAIN

Phone.: +34 91 660 03 47

User:Alberto Ruiz

2016-06-10T10:48:14Z

Alberto Ruiz: