Absolut multiturn position encoder CANLift: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
No edit summary
 
m (typo)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[de:Absoluter_Multiturn_Drehgeber_CANLift]]
[[de:Absoluter_Multiturn_Drehgeber_CANLift]]
{{translation}}
= Manufacturer =
= Manufacturer =
[[Fritz Kübler GmbH]]
[[Fritz Kübler GmbH]]


= Profil =
= Profil =
CiA DSP-417
CiA-417


= Description =
= Description =
== Hauptmerkmale ==
== Main Features ==
Multiturn Drehgeber Serie 5868/88
Multiturn absolut psoition encoder seria 5868/88


Die CANLift-Drehgeber der Baureihe 5868/88 unterstützen das neueste CANopen Kommunikations-profil nach DS 301 V4.02. Zusätzlich ist das gerätespezifische Profil DS 417 V1.1 (für Liftapplikationen) adaptiert.
The CANLift-encoder from serias 5868/88 supports the latest CANopen communication-profil of CiA-301 V4.02. Additional is the unit-specific profile CiA-417 V1.1 (for liftapplications) adopted.
Als Betriebsarten können Polled Mode, Cyclic Mode, Sync Mode und ein High Resolution Sync Protokoll
As oparting modes can be choosen from Polled Mode, Cyclic Mode, Sync Mode and a High Resolution Sync Protokoll. Furthermore it is possible to set-up scalings, preset values, limit-switch values and many other, additional parameters with the CAN-bus. With switching on all parameters are loaded from an EEPROM, where they were saved before zero potential safe. Positions, speed, acceleration, as well as the state of the 4 limit switches can get combined very variable as output values in PDO (PDO mapping).
gewählt werden. Weiterhin lassen sich Skalierungen, Presetwerte, Endschalterwerte und viele weitere,
zusätzliche Parameter über den CAN-Bus programmieren. Beim Einschalten werden sämtliche Parameter aus einem EEPROM geladen, die zuvor nullspannungssicher abgespeichert wurden. Als Ausgabewerte können Position, Geschwindigkeit, Beschleunigung sowie der Status der vier Endschalter sehr variabel als PDO kombiniert werden (PDO Mapping).


Weiterhin sind die Drehgeber mit D-SUB Stecker, M12, M23 oder mit Kabelabgang verfügbar, bei denen die Geräteadresse und Baudrate softwaregesteuert verändert wird. Drei LEDs auf der Rückseite
Furthermore the encoders are available with D-SUB plug, M12, M23, or with cable outlet, on which the unit adress and the baudrate gets changed software controlled. Three LEDs on the backside signal the state of operation and errors of the CAN-bus as well as the condition of an internal diagnosis. CANLift-encoders are available also as hollow shaft and as full-axel version and thanks to degree of protection IP65 also suitable for raugh industrial surroundings and in an ATEX version.
signalisieren Betriebs- und Fehlerstatus des CAN-Busses sowie den Zustand einer internen Diagnose.
CANLift-Drehgeber sind als Sackloch- und Vollwellenversionen lieferbar und dank Schutzart IP 65 auch
für raue Industrieumgebungen geeignet.


== Programmierbare Parameter ==
== Programmable Parameters ==
* 2 virtuelle Geräte
* 2 virtual units
* Drehrichtung (Complement)
* sense of rotation (complement)
* Auflösung pro Umdrehung
* encoding per turn
* Presetwert
* preset values
* Geschwindigkeit
* speed
* Beschleunigung
* acceleration
* Baudrate und CAN-Identifier
* baudrate and CAN-identifier
* Übertragungsmodi: Polled Mode, Cyclic Mode, Sync Mode und High Resolution Sync Protokoll
* transmitiing modes: Polled Mode, Cyclic Mode, Sync Mode and High Resolution Sync Protokoll
* 4 Endschalter
* 4 limit switches


== Aufbau Elektronik ==
== structure/design electronic ==
* Betriebszustandsanzeige durch 3 Leuchtdioden in der Anschlusshaube
* state of operation signal by 3 LEDs in the junction cover
* hochintegrierte Schaltung in SMD Technologie
* high intergrated circuit/control with SMD technology


= State =
= State =
Lieferbar
available


= Picture =
= Picture =
[[Image:Absoluter_Multiturn_Drehgeber_CANLift.png]]
[[Image:Absoluter_Multiturn_Drehgeber_CANLift.png]]


[[Category: Products DSP417]]
[[Category: Products CiA-417]]

Latest revision as of 00:19, 4 November 2007

Manufacturer

Fritz Kübler GmbH

Profil

CiA-417

Description

Main Features

Multiturn absolut psoition encoder seria 5868/88

The CANLift-encoder from serias 5868/88 supports the latest CANopen communication-profil of CiA-301 V4.02. Additional is the unit-specific profile CiA-417 V1.1 (for liftapplications) adopted. As oparting modes can be choosen from Polled Mode, Cyclic Mode, Sync Mode and a High Resolution Sync Protokoll. Furthermore it is possible to set-up scalings, preset values, limit-switch values and many other, additional parameters with the CAN-bus. With switching on all parameters are loaded from an EEPROM, where they were saved before zero potential safe. Positions, speed, acceleration, as well as the state of the 4 limit switches can get combined very variable as output values in PDO (PDO mapping).

Furthermore the encoders are available with D-SUB plug, M12, M23, or with cable outlet, on which the unit adress and the baudrate gets changed software controlled. Three LEDs on the backside signal the state of operation and errors of the CAN-bus as well as the condition of an internal diagnosis. CANLift-encoders are available also as hollow shaft and as full-axel version and thanks to degree of protection IP65 also suitable for raugh industrial surroundings and in an ATEX version.

Programmable Parameters

  • 2 virtual units
  • sense of rotation (complement)
  • encoding per turn
  • preset values
  • speed
  • acceleration
  • baudrate and CAN-identifier
  • transmitiing modes: Polled Mode, Cyclic Mode, Sync Mode and High Resolution Sync Protokoll
  • 4 limit switches

structure/design electronic

  • state of operation signal by 3 LEDs in the junction cover
  • high intergrated circuit/control with SMD technology

State

available

Picture