CAN-I/O-Module CIO-01A

From CANopen-Lift
Revision as of 08:57, 29 September 2014 by Bastian.Heynen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Manufacturer

Böhnke + Partner GmbH

Profile

CiA-417

Port

  • Transceiver according to ISO 11898 (dielectric strength bus line +/- 30 V)
  • Bit rate and timing according to CiA-301
  • galvanically isolated
  • Autobaud
  • Plug: Open Style two poles
  • NodeID 125 (parametrizable)
  • two status LEDs according to CiA-303-3
  • Software update via CANopen port possible
  • Termination with switch on board

Description

CIO-01A contains the virtual devices Input Panel Unit and Output Panel Unit and can be used universally for processing signals of this devices. There are 31 inputs, outputs and calls available - depending on the configuration. It is expandable with the board CLE-01 with another 32 terminals. The CAN bus will be made available at the open style terminal to connect additional components.

Status

Deliverable

Verified

Logo for verified devices

The functionality of the module was successfully tested at the following PlugFests:

Image

Module CIO-01A with 32 freely programmable inputs/outputs/calls


Weblink