CAN-Leistungs-Platine CLK-01: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
No edit summary
m (typo)
 
Line 4: Line 4:


= Profil =
= Profil =
CiA DSP-417
CiA-417


= Interface =
= Interface =
* transceiver ISO 11898 conform (bus proof voltage +/- 30 V)
* transceiver ISO 11898 conform (bus proof voltage +/- 30 V)
* bitrate and -timing CiA DS-301 conform  
* bitrate and -timing CiA-301 conform  
* galvanic insulated
* galvanic insulated
* auto baud detection
* auto baud detection
Line 16: Line 16:
** Open Style with 3 contacts   
** Open Style with 3 contacts   
* NodeID 12 (parametrizable)
* NodeID 12 (parametrizable)
* one state LED CiA DR-303-3 conform
* one state LED CiA-303-3 conform
* software update by using the CANopen interface
* software update by using the CANopen interface
* termination with a resistor at the Open Style connector
* termination with a resistor at the Open Style connector
Line 29: Line 29:
[[Image:Boehnkepartner_clk-01.png]]
[[Image:Boehnkepartner_clk-01.png]]


[[Category: Products DSP417]]
[[Category: Products CiA-417]]

Latest revision as of 00:01, 4 November 2007

Manufacturer

Böhnke + Partner GmbH

Profil

CiA-417

Interface

  • transceiver ISO 11898 conform (bus proof voltage +/- 30 V)
  • bitrate and -timing CiA-301 conform
  • galvanic insulated
  • auto baud detection
  • connector:
    • D-Sub 9-Pin
    • RJ45
    • Open Style with 3 contacts
  • NodeID 12 (parametrizable)
  • one state LED CiA-303-3 conform
  • software update by using the CANopen interface
  • termination with a resistor at the Open Style connector

Description

The CLK-01 is used for signal processing of all carsignals of an elevator. It provides 16 inputs and 2 relay outputs. It is extendable by each 32 callterminals using the board CLE-01. The CAN-bus appropriates terminals, RJ45-socket and D-Sub with 9 contacts to connect further components.

State

available

Picture