CAN I/O-Board CLK-02: Difference between revisions
Jump to navigation
Jump to search
(Created page with "en:CAN I/O-Board CLK-02 = Hersteller = Böhnke + Partner GmbH = Profil = CiA-417 = Schnittstelle = * Transceiver nach ISO 11898 (Spannungsfest...") |
(→Status) |
||
(5 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
[[ | [[de:CAN I/O-Board CLK-02]] | ||
= | = Manufacturer = | ||
[[Böhnke & Partner GmbH|Böhnke + Partner GmbH]] | [[Böhnke & Partner GmbH|Böhnke + Partner GmbH]] | ||
= | = Profile = | ||
CiA-417 | CiA-417 | ||
= | = Port = | ||
* Transceiver | * Transceiver according to ISO 11898 (dielectric strength bus line +/- 30 V) | ||
* | * Bit rate and timing according to CiA-301 | ||
* | * galvanically isolated | ||
* Autobaud | * Autobaud | ||
* | * Plug: | ||
** D-Sub 9-Pin | ** D-Sub 9-Pin | ||
** Open Style | ** Open Style three poles | ||
* NodeID 12 ( | * NodeID 12 (parametrizable) | ||
* | * two status LEDs according to CiA-303-3 | ||
* | * Software update via CANopen port possible | ||
* | * Termination with switch at the board | ||
= | = Description = | ||
The CLK-02 serves to process all car signals of a lift. It provides 16 inputs, 8 calls, 8 outputs and 7 relay outputs. It is expandable with the board CLE-01 for additional 32 terminals each. The CAN bus will be made available at the open style terminal and a socket D-sub 9-Pin to connect other components. | |||
= Status = | = Status = | ||
available | |||
= Verified = | = Verified = | ||
[[ | [[Image:Logo_CANopen-Lift_verified.png|thumb|Logo for verified devices]] | ||
The functionality of the module was successfully tested at the following [[CANopen Lift Plugfest|PlugFests]]: | |||
* [[ | * [[3rd CANopen Lift plug fest|3rd CANopen PlugFest 2010]] | ||
= | = Image = | ||
[[ | [[Image:Boehnkepartner_clk-02.jpg|400px|Baugruppe CLK-02 für den Einsatz auf der Kabine eines Aufzugs]] | ||
[[ | [[Category: Products CiA-417]] | ||
[[ | [[Category:verified]] |
Latest revision as of 21:39, 8 February 2015
Manufacturer
Profile
CiA-417
Port
- Transceiver according to ISO 11898 (dielectric strength bus line +/- 30 V)
- Bit rate and timing according to CiA-301
- galvanically isolated
- Autobaud
- Plug:
- D-Sub 9-Pin
- Open Style three poles
- NodeID 12 (parametrizable)
- two status LEDs according to CiA-303-3
- Software update via CANopen port possible
- Termination with switch at the board
Description
The CLK-02 serves to process all car signals of a lift. It provides 16 inputs, 8 calls, 8 outputs and 7 relay outputs. It is expandable with the board CLE-01 for additional 32 terminals each. The CAN bus will be made available at the open style terminal and a socket D-sub 9-Pin to connect other components.
Status
available
Verified
The functionality of the module was successfully tested at the following PlugFests: