CAN Network CANnet

From CANopen-Lift
Revision as of 11:33, 8 February 2008 by RSbySCHÄFER (talk | contribs)
Jump to navigation Jump to search

The cable system consists of 4 stands with a nominal wire size of 0,75 mm². Two stands (bl/rd) are used for power supply and two stands (wt/bl)are used as bus line. The stands of power supply and the stands of bus line are always twisted together.

To realize a simly and reliable installation of CANopen components, the using of preconverted cable segments proffers clearly advantages.

Power Cable 5m
Top Power Cable 2m
Node Connecting Cable 4m / 50cm / 20cm
Cable Coupling 10cm
Network Terminal
  • No customisation of cable segments
  • No spring clips
  • No connecting diagram neccassary
  • Wrong terminal connections impossibly


Following cable segments are available

  • Power Cable ASK5000
  • Top Power Cable KASK2000 (optional)
  • Node Connecting Cable KVK4000
  • Node Connecting Cable KVK500
  • Node Connecting Cable KVK200
  • Cable Coupling KK100
  • Network Terminal NT120


Example for Connection: CANnet Topology