CAN Network CANnet

From CANopen-Lift
Revision as of 09:01, 20 October 2008 by RSbySCHÄFER (talk | contribs)
Jump to navigation Jump to search

The cable system consists of 4 wires with a nominal size of 0,75 mm². Two wires (bl/rd) are used for power supply and two wires (wt/bl)are used as bus line. The wires of power supply and the wires of BUS line are always twisted together.

To realize a simly and reliable installation of a network with CANopen components, the using of preconverted cable segments proffers clearly advantages.

Power Cable 10m / 5m
Interface Cable 50cm
Node Connecting Cable 4m / 50cm / 20cm
Bypass Coupling 10cm
Network Terminal
  • No customisation of cable segments
  • No spring clips
  • No connecting diagram neccassary
  • Wrong terminal connections impossibly
  • Simply expansion of the can network
  • No instruments for building a can network neccessary
  • No specific knowledge about CANopen neccessary


Following cable segments are available

  • Power Cable ASK10000
  • Power Cable ASK5000
  • Interface Cable SSK500
  • Node Connecting Cable KVK4000
  • Node Connecting Cable KVK500
  • Node Connecting Cable KVK200
  • Bypass Cable UEB100
  • Network Terminal NT120


Example for Connection: CANnet Topology