Difference between revisions of "CANopen-Lift PlugFest - 2016-09"

From CANopen-Lift
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[de:CANopen Lift PlugFest - 2016-09]]
[[de:CANopen Lift PlugFest - 2016-09]]
Am 6. September 2016 fand zum dreizehnten Mal das CANopen-Lift PlugFest statt. Gastgeber des PlugFests war wieder einmal die CiA in Nürnberg. Auf Grund der vielen Teilnehmer, die sich zu dieser Veranstaltung angemeldet haben, konnte das PlugFest jedoch nicht mehr in den Räumen der CiA stattfinden und es mussten wieder Räume im Hotel Ibis Nürnberg City am Plärrer gebucht werden.
On the 6th of September 2016, the 13th CANopen-Lift PlugFest took place. Host was once again the CiA in Nuremberg. But due to several interested participants, the PlugFest exceeded the capacities of the rooms provided by the CiA, so that it was necessary to rent rooms in the Ibis Nuremburg City hotel.


Hier trafen sich die Mitglieder der Special Interest Group Lift, um die Interoperabilität ihrer Produkte zu testen. Im Mittelpunkt des Treffens stand wieder die Unterstützung der Teilnehmer, die zum ersten Mal an diesem Treffen teilnahmen, um ihre Produkte zu testen, sowie der Test der ersten Safety-Positionsencoder, die neu als virtuelles Gerät '[[Position Supervisor Unit]]' im Standard beschrieben wurden.
There, the members of the Special Interest Group Lift met to test their devices’ interoperation. The center of attention was again to support those participants who attended the event for the first time to test their products, as well as the first test of the safety position encoder, which was newly described as a virtual device “Position Supervisor Unit”.


Unter den Teilnehmern befanden sich diesmal fünf Steuerungshersteller, vier Hersteller von Frequenzumrichtern, zwei Anbieter von Anzeigesystemen, ein Tableauhersteller, drei Hersteller von Lastmesseinrichtungen und zwei Hersteller von Safety-Positionsencodern.
Part of the event were this time five control manufacturers, four frequency converter manufacturers, two suppliers of display systems, one tableau manufacturer, three weighting device manufacturers and two safety position encoder manufacturers.


Auch die weitere Verbreitung von CANopen-Lift im Ausland war zu erkennen. So war bei diesem Treffen erstmals auch ein Teilnehmer aus Tschechischen Republik vertreten.
Recognizable was also the spread of CANopen-Lift to foreign countries, as there was a participant from Czech Republic for the first time. Additionally, participants from Denmark, Germany, France, Lichtenstein, Sweden, Switzerland, Spain and the U.S. had arrived to visit the CANopen-Lift PlugFest. The [[CANopen Lift PlugFest - 2017-04|next CANopen-Lift PlugFest]] is planned to take place at the CiA in Nuremberg in April, 2017.


Zu dem Treffen reisten Entwickler aus Dänemark, Deutschland, Frankreich, Lichtenstein, Schweden, Schweiz, Spanien, Tschechien und den USA an.


Das [[CANopen Lift PlugFest - 2017-04|nächste CANopen-Lift PlugFest]] ist bei der CiA in Nürnberg für April 2017 geplant. 


<gallery perrow="3" caption="Impressions of the 13th CANopen-Lift PlugFest">
<gallery perrow="3" caption="Impressions of the 13th CANopen-Lift PlugFest">
Line 22: Line 20:


[[Category: PlugFest]]
[[Category: PlugFest]]
[[Category: Press]]

Latest revision as of 10:39, 30 September 2016

On the 6th of September 2016, the 13th CANopen-Lift PlugFest took place. Host was once again the CiA in Nuremberg. But due to several interested participants, the PlugFest exceeded the capacities of the rooms provided by the CiA, so that it was necessary to rent rooms in the Ibis Nuremburg City hotel.

There, the members of the Special Interest Group Lift met to test their devices’ interoperation. The center of attention was again to support those participants who attended the event for the first time to test their products, as well as the first test of the safety position encoder, which was newly described as a virtual device “Position Supervisor Unit”.

Part of the event were this time five control manufacturers, four frequency converter manufacturers, two suppliers of display systems, one tableau manufacturer, three weighting device manufacturers and two safety position encoder manufacturers.

Recognizable was also the spread of CANopen-Lift to foreign countries, as there was a participant from Czech Republic for the first time. Additionally, participants from Denmark, Germany, France, Lichtenstein, Sweden, Switzerland, Spain and the U.S. had arrived to visit the CANopen-Lift PlugFest. The next CANopen-Lift PlugFest is planned to take place at the CiA in Nuremberg in April, 2017.