CANopen Lift PlugFest - 2015-04: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
(Created page with "de:CANopen Lift PlugFest - 2015-04 thumb|full house at PlugFest 2015-04 Am 14. April 2015 trafen sich die...")
 
No edit summary
 
Line 1: Line 1:
[[de:CANopen Lift PlugFest - 2015-04]]
[[de:CANopen Lift PlugFest - 2015-04]]
[[File:2015-04-14_full_house_at_10th_CANopen-Lift_plugfest.jpg|thumb|full house at PlugFest 2015-04]]
[[File:2015-04-14_full_house_at_10th_CANopen-Lift_plugfest.jpg|thumb|full house at PlugFest 2015-04]]
The members of the special interest group lift met for the 10th time to test their CANopen-Lift products’ interoperation on the 14th April, 2015. The great interest in this event and the short-term registration of some attendees led to quite cramped conditions in the present premises. Five control system manufacturers, two frequency converter manufacturers, three suppliers of display systems, one indicator board manufacturer, one emergency systems manufacturer and one manufacturer of door control systems participated the event. The list of attendees has shown that the CANopen-Lift standard meets international acceptance all the same. Among those present developers were representatives from Germany, France, Sweden, Spain and also China and the USA for the first time.


Am 14. April 2015 trafen sich die Mitglieder der Special Interest Group Lift zum 10. Mal beim CANopen-Lift-PlugFest, um die Interoperabilität ihrer Produkte zu testen. Das große Interesse an dieser Veranstaltung und die zu kurzfristige Anmeldung einiger Teilnehmer sorgte diesmal zu recht beengten Verhältnissen. Unter den Teilnehmern befanden sich fünf Hersteller von Steuerungssystemen, zwei Hersteller von Frequenzumrichtern, drei Anbieter von Anzeigesystemen, ein Tableauhersteller, ein Hersteller von Notrufsystemen und ein Hersteller von Türsteuergeräten. Dass der Standard CANopen-Lift auch international Anerkennung findet zeigt die Teilnehmerliste. Diesmal reisten die Entwickler aus Deutschland, Frankreich, Schweden, Spanien und erstmals auch aus China und den USA an. 
Due to the high number of participants, especially the control system manufacturers present had to deal with an extensive workload. Everyone wanted to test their device with the systems. Particularly the participants with new devices was given the opportunity to intensively test their devices involving the control systems. More, remaining uncertainty was discussed with the other developers. This time no tests with extremely long bus lines and high bus loads were carried out. The main focus was the test of new devices.
 
Auf Grund der großen Anzahl der Teilnehmer musste vor allem von den anwesenden Steuerungsherstellern ein sehr hohes Pensum absolviert werden. Jeder wollte seine Geräte mit diesen Systemen testen. Vor allem für die Teilnehmer, die zum ersten Mal mit ihren neuen Geräten dabei waren, bot sich die einmalige Möglichkeit, intensive Tests mit den Steuerungen durchzuführen und viele noch vorhandene Unsicherheiten mit den anwesenden Entwicklern zu besprechen.  
 
Gastgeber des PlugFests war wieder einmal die CiA in Nürnberg.
 
Bei diesem PlugFest konnten keine Tests mit sehr langen Busleitungen und hohen Buslasten durchgeführt werden, da diesmal der Test der neuen Geräte im Fokus stand.  
 


The next PlugFest is going to take place in [[CANopen Lift PlugFest - 2015-09|September, 2015]]. If requested, additional PlugFests can be take place previously.
The next PlugFest is going to take place in [[CANopen Lift PlugFest - 2015-09|September, 2015]]. If requested, additional PlugFests can be take place previously.

Latest revision as of 10:21, 7 October 2016

full house at PlugFest 2015-04

The members of the special interest group lift met for the 10th time to test their CANopen-Lift products’ interoperation on the 14th April, 2015. The great interest in this event and the short-term registration of some attendees led to quite cramped conditions in the present premises. Five control system manufacturers, two frequency converter manufacturers, three suppliers of display systems, one indicator board manufacturer, one emergency systems manufacturer and one manufacturer of door control systems participated the event. The list of attendees has shown that the CANopen-Lift standard meets international acceptance all the same. Among those present developers were representatives from Germany, France, Sweden, Spain and also China and the USA for the first time.

Due to the high number of participants, especially the control system manufacturers present had to deal with an extensive workload. Everyone wanted to test their device with the systems. Particularly the participants with new devices was given the opportunity to intensively test their devices involving the control systems. More, remaining uncertainty was discussed with the other developers. This time no tests with extremely long bus lines and high bus loads were carried out. The main focus was the test of new devices.

The next PlugFest is going to take place in September, 2015. If requested, additional PlugFests can be take place previously.