CANopen Lift PlugFest - 2016-04: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
(Created page with "de:CANopen Lift PlugFest - 2016-04 right|350px|Interoperability Der Tradition folgend fand am 12. April 2016 das zwölfte CANopen-Lift...")
 
No edit summary
Line 2: Line 2:
[[File:2016-04-12_PlugFest_01.JPG|right|350px|Interoperability]]
[[File:2016-04-12_PlugFest_01.JPG|right|350px|Interoperability]]


Der Tradition folgend fand am 12. April 2016 das zwölfte CANopen-Lift PlugFest statt. Gastgeber des PlugFests war wieder einmal die CiA in Nürnberg. Auf Grund der vielen Teilnehmer, die sich zu dieser Veranstaltung angemeldet haben, konnte das PlugFest jedoch nicht mehr in den Räumen der CiA stattfinden und es mussten kurzfristig Räume im InterCityHotel Nürnberg gebucht werden.  
Traditionally, the 12th CANopen-Lift PlugFest took place on the 12th of April, 2016, once again hosted by the CiA in Nuremberg. Due to more participants than expected, the CiA was not able to offer sufficient premises, so they had to draw on some rooms in the InterCityHotel Nuremberg.


Hier trafen sich die Mitglieder der Special Interest Group Lift bereis zum 12. Mal, um die Interoperabilität ihrer Produkte zu testen. Im Mittelpunkt des Treffens stand die Unterstützung der Teilnehmer, die zum ersten Mal an diesem Treffen teilnahmen, um ihre Produkte zu testen, sowie der Test der ersten Safety-Positionsencoder, die neu als virtuelles Gerät 'Position Supervisor Unit' im Standard beschrieben wurden.  
There, the members of the Special Interest Group Lift met already for the 12th time to test their devices interoperation. The center of attention was again to support those participants who attended the event for the first time to test their products, as well as the first test of the safety position encoder, which was newly described as a virtual device “Position Supervisor Unit”.


Unter den Teilnehmern befanden sich diesmal fünf Steuerungshersteller, zwei Hersteller von Frequenzumrichtern, drei Anbieter von Anzeigesystemen, ein Tableauhersteller, drei Hersteller von Lastmesseinrichtungen und zwei Hersteller von Safety-Positionsencodern.  
Present were this time five controler manufacturers, two frequency converter manufacturers, three suppliers of display systems, one instruction board manufacturer, three weighting device manufacturers and two safety position encoder manufacturers.
 
Another highlight was the continuous spread of CANopen- lift to foreign countries, as there were representatives from nine countries for the first time, arriving from China, Denmark, Germany, France, Lichtenstein, Sweden, Switzerland, Spain and the U.S. The next PlugFest is going to take place in [[CANopen Lift PlugFest - 2016-09|September, 2016]]. If requested, additional PlugFests can be take place previously.
Ein weiteres Highlight zeigt die zunehmende Verbreitung von CANopen-Lift im Ausland. So waren bei diesem Treffen erstmals Teilnehmer aus neun Nationen vertreten.
 
Zu dem Treffen reisten Entwickler aus China, Dänemark, Deutschland, Frankreich, Lichtenstein, Schweden, Schweiz, Spanien und den USA an.
 
Das nächste PlugFest ist für [[CANopen Lift PlugFest - 2016-09|September 2016]] geplant. Bei Bedarf können vorab weitere PlugFeste stattfinden.


<gallery perrow="3" caption="Impressions of the 12th CANopen-Lift PlugFest">
<gallery perrow="3" caption="Impressions of the 12th CANopen-Lift PlugFest">

Revision as of 10:52, 30 September 2016

Interoperability
Interoperability

Traditionally, the 12th CANopen-Lift PlugFest took place on the 12th of April, 2016, once again hosted by the CiA in Nuremberg. Due to more participants than expected, the CiA was not able to offer sufficient premises, so they had to draw on some rooms in the InterCityHotel Nuremberg.

There, the members of the Special Interest Group Lift met already for the 12th time to test their devices interoperation. The center of attention was again to support those participants who attended the event for the first time to test their products, as well as the first test of the safety position encoder, which was newly described as a virtual device “Position Supervisor Unit”.

Present were this time five controler manufacturers, two frequency converter manufacturers, three suppliers of display systems, one instruction board manufacturer, three weighting device manufacturers and two safety position encoder manufacturers. Another highlight was the continuous spread of CANopen- lift to foreign countries, as there were representatives from nine countries for the first time, arriving from China, Denmark, Germany, France, Lichtenstein, Sweden, Switzerland, Spain and the U.S. The next PlugFest is going to take place in September, 2016. If requested, additional PlugFests can be take place previously.

  • Impressions of the 12th CANopen-Lift PlugFest
Retrieved from "https://en.canopen-lift.org/index.php?title=CANopen_Lift_PlugFest_-_2016-04&oldid=5178"