Controller MLC-8000: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 10: Line 10:
* simple an time saving installation by use of the CAN-bus-system and providing of ready-made-cable
* simple an time saving installation by use of the CAN-bus-system and providing of ready-made-cable
* fully automatic measuring within shortest time
* fully automatic measuring within shortest time
* diagnosis-tool and take-into-operation-tool (hand-terminal) in cleartext, can be plugged to the control panel as awell as to the terminal box on car.
* diagnosis-tool and take-into-operation-tool (hand-terminal) in cleartext, can be plugged to the control panel as well as to the terminal box on car.


At this time the controller can be delivered only with a proprietary CAN-bus-protocol. The implementation of the CANopen-standard is in developement at present.
At this time the controller can be delivered only with a proprietary CAN-bus-protocol. The implementation of the CANopen-standard is in development at present.


= State =
= State =
in development
available since 2008


= Picture =
= Picture =

Latest revision as of 20:34, 16 July 2015

Manufacturer

Intec GmbH

Profil

CiA-417

Description

The liftcontroller MLC-8000 can be used with cost-intensive and with high-tech-elevators and covers all kind of drives. Some of the highlights are:

  • simple an time saving installation by use of the CAN-bus-system and providing of ready-made-cable
  • fully automatic measuring within shortest time
  • diagnosis-tool and take-into-operation-tool (hand-terminal) in cleartext, can be plugged to the control panel as well as to the terminal box on car.

At this time the controller can be delivered only with a proprietary CAN-bus-protocol. The implementation of the CANopen-standard is in development at present.

State

available since 2008

Picture