Drive frequency converter FB-20

From CANopen-Lift
Revision as of 18:39, 12 May 2017 by WikiSysop (talk | contribs) (→‎Picture)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Manufacturer

Brunner & Fecher Regelungstechnik GmbH

Profil

CiA-417

Description

The FB-20 and FB-22 series have been developed precisely for the special requirements of elevator constructions. The newest technology delivers particularly smooth and accurate movements, automatically distance calculation, optimal speed run floor to floor, allows time-saving direct drive-in and open loop. They are also suitable for emergency operation / evacuation with battery or UPS.

Properties and features

  • suitable for operation without main contactors (STO)
  • noiseless switch frequency 16kHz
  • integrated RFI filter (up to 62A) – Emission: EN 55011-B
  • suitable for new installations, modernisation, asynchronous- and synchronous drives
  • for panel mounting or wall mounting in the machine room or elevator shaft

Interface

  • Node: ID 2
  • Operating mode: position-mode und velocity-mode
  • Baud rate: 125 / 250 kBaud (adjustable)
  • Connection: plug 2- pin with screw terminals
  • Termination: with jumper

State

available

Verified

Logo for verified devices
Logo for verified devices

The functionality of the module was successfully tested at the following PlugFests:


Picture

Inverter FB-20