OMEGA 12-C: Difference between revisions
Jump to navigation
Jump to search
(→State) |
(→Description: typo) |
||
Line 18: | Line 18: | ||
The main features of this unit are: | The main features of this unit are: | ||
* | * measuring, monitoring and limiting load in elevators. | ||
* | * up to 12 individual rope tension monitoring | ||
* | * wire rope tension adjustment | ||
* 6 | * 6 LED indicators | ||
* | * hold input | ||
* 4 | * 4 alarm thresholds (Full Load, Over Load, Zero Cabin, Slack Rope Tension) | ||
* 4 | * 4 relays output | ||
* 0- | * 0-10 V analog output | ||
* 4- | * 4-20 mA analog output | ||
* | * cabin display output | ||
* | * CANopen-Lift CiA-417 | ||
* | * software chain compensation | ||
* | * hardware chain compensation | ||
= State = | = State = |
Revision as of 19:02, 8 February 2015
Manufacturer
Profil
CiA-417
Interface
- transceiver ISO 11898 conform (bus proof voltage +/- 30 V)
- bitrate and -timing CiA-301 conform
- galvanic insulated
- connector: open style with 5 contacts
- software update via USB
- termination with a resistor at the open style connector
Description
Unit control is a Load Weighing device of the (NG) New Generation units from Dinacell Electronic with CANopen-Lift CiA-417 integrated.
The main features of this unit are:
- measuring, monitoring and limiting load in elevators.
- up to 12 individual rope tension monitoring
- wire rope tension adjustment
- 6 LED indicators
- hold input
- 4 alarm thresholds (Full Load, Over Load, Zero Cabin, Slack Rope Tension)
- 4 relays output
- 0-10 V analog output
- 4-20 mA analog output
- cabin display output
- CANopen-Lift CiA-417
- software chain compensation
- hardware chain compensation
State
in development
or available