CANwizard CS08: Difference between revisions

From CANopen-Lift
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The Aktiv X Control panel CANwizard_CS08 ist die visualisierte Benutzeroberfläche die auf der Plattform vom CANwizard der [[Böhnke & Partner GmbH |Böhnke + Partner GmbH]] basiert. Diese ermöglicht es, auch ohne CANopen spezifische Kenntnisse die Konfiguration für den [[Hall Panel Node CANsmall CS08]] der [[SCHAEFER GmbH]] vorzunehmen.<br />
The Aktiv X Control panel CANwizard_CS08 is a visual operator interface which is based on the platform CANwizard of [[Böhnke & Partner GmbH |Böhnke + Partner GmbH]]. This control panel makes it possible to configurate the [[Panel Node CANsmall CS08]] of [[SCHAEFER GmbH]] with no special knowledge of the CANopen system.<br />  


Das ActiveX-Steruerelement CANwizard_CS08 ist integriert im CANwizard. Wird über den CANwizard das CAN Netzwerk eingescannt oder ein einzelner CAN Knoten eingelesen, so ermittelt CANwizard über die Vendor-ID und den Poduct-Code welches ActiveX-Steuerelemt zu starten ist.<br />
The Aktiv X Control Panel CANwizard_CN16 is included in the CANwizard. When the CAN network or several CANnode are scanned by the CANwizard, the CANwizard identify which AktivX- control panel has to be started over the Vector-ID and the Product-Code.<br />


Das ActiveX-Steuerelemt CANwizard_CS08 wiederum erkennt über die Objekteinträge um welche Version des  CANsmall es sich handelt. Diese Version des CANsmall erscheint darauf hin auf der visualisierten Benutzeroberfläche. Über diese Benutzeroberfläche ist es möglich die geräte- und herstellerspezifischen Parameter einzugeben.
The AktivX control panel CANwizard_CS08 can identify with the date entry of the object which version the CANnode is. This version of the CANnode is shown after that at the visual operator interface. With the operator interface the hardware- and producer specific parameters can be admitted.
<br />


   [[Image:CANwizard_CS08_VST_01.jpg|thumb|Configuratin of CS08_VST]]
   [[Image:CANwizard_CS08_VST_01.jpg|thumb|Configuratin of CS08_VST]]
Line 13: Line 14:




Ferner stehen über der Benutzeroberfläche noch die Informatinen zur Verfügung:
The operator interface shows the following information:  
*Gerätename
*Hardware name
*Harewareversion
*Hardware version
*Softwareversion
*Software version
*Bezeichnung der EDS-Datei
*Description of the EDS-file
<br />
<br />


Über verschiedene Schaltflächen ist es möglich:
The operation wizards can:  
*Konfiguration senden
*send configurations
*Gerät neu einlesen
*reread the hardware
*Grundeinstellungen bearbeiten
*change default settings
*Konfiguration löschen
*delete configurations
*Funktionstest starten
*start function tests
*Druckoption f. Klemmenplan (in Verbereitung)<br />
*print the clip plan (in preparation)
<br />
<br />


Die Konfiguration erfolgt über versiedene Eingabedialoge:
 
*Klemmentyp
The configuration results from several inputs:  
*Klemmenbeschreibung
*Clip type
*(1)Kodierung
*Description of the clip
*(1)Leitungsnummer (Adresse)
*(1)coding
(1)Nur bei Funktionen die mehr als eine Leitung in Anschpruch nehmen<br />
*(1)Line number (address)  
(1)Only for functions which needs more then one wire<br />
<br />
<br />
Jede Klemme wird einzeln konfiguriert
Every clip has to be configured separately.


Des weiteren ist bei der Konfiguration der Versionen CANsmall CS08_VPM und CS08_HPM  
At the version CANnode CS08_VPM and CS08_HPM is an option of a standard configuration for illumination modules. This configuration saves time and minimise mistakes at the configuration.<br />
die Option einer Standardkonfiguration für Anzeigemodule vorhanden.
Dies spart Zeit und minimiert eventuelle Eingabefehler bei der Konfiguration..<br />
<br />
<br />
Über den Dialog Grundeinstellungen ist der Zugriff auf die herstellerspezifischen Objekte möglich.
Access to manufacturer specific objects is possible via the basic setting dialog. The following parameter can only be filed one-time and irrevocably on the CAN node .
Folgende Parameter können nur einmalig und unwiederriflich auf dem CAN Knoten abegelgt werden.
*Ordering data
*Ordering data
**Order number
**Order number
Line 51: Line 50:
*Device Identity
*Device Identity
**Hardware version
**Hardware version
**Artikle number
**Article number
**Software version
**Software version
**Serial number
**Serial number
*Network Settings
*Network settings
**Node-ID
**Node ID
**Baudrate
**Baudrate
**Baudrate filter




[[Category: Products CiA-417]]
[[Category: Products CiA-417]]

Revision as of 11:15, 20 October 2008

The Aktiv X Control panel CANwizard_CS08 is a visual operator interface which is based on the platform CANwizard of Böhnke + Partner GmbH. This control panel makes it possible to configurate the Panel Node CANsmall CS08 of SCHAEFER GmbH with no special knowledge of the CANopen system.

The Aktiv X Control Panel CANwizard_CN16 is included in the CANwizard. When the CAN network or several CANnode are scanned by the CANwizard, the CANwizard identify which AktivX- control panel has to be started over the Vector-ID and the Product-Code.

The AktivX control panel CANwizard_CS08 can identify with the date entry of the object which version the CANnode is. This version of the CANnode is shown after that at the visual operator interface. With the operator interface the hardware- and producer specific parameters can be admitted.

Configuratin of CS08_VST
Configuratin of CS08_VPM
Configuratin of CS08_HST
Configuratin of CS08_HPM
Dialog Basic Settings


The operator interface shows the following information:

  • Hardware name
  • Hardware version
  • Software version
  • Description of the EDS-file


The operation wizards can:

  • send configurations
  • reread the hardware
  • change default settings
  • delete configurations
  • start function tests
  • print the clip plan (in preparation)



The configuration results from several inputs:

  • Clip type
  • Description of the clip
  • (1)coding
  • (1)Line number (address)

(1)Only for functions which needs more then one wire

Every clip has to be configured separately.

At the version CANnode CS08_VPM and CS08_HPM is an option of a standard configuration for illumination modules. This configuration saves time and minimise mistakes at the configuration.

Access to manufacturer specific objects is possible via the basic setting dialog. The following parameter can only be filed one-time and irrevocably on the CAN node .

  • Ordering data
    • Order number
    • Sheet number
    • Device number
    • Configuration date
  • Device Identity
    • Hardware version
    • Article number
    • Software version
    • Serial number
  • Network settings
    • Node ID
    • Baudrate
    • Baudrate filter
Retrieved from "https://en.canopen-lift.org/index.php?title=CANwizard_CS08&oldid=2339"