CANopen Lift on the Interlift 2019
In 2019 CAN in Automation (CiA) was once again represented with a stand at the Interlift to give visitors an understanding of the CANopen-Lift standard.
In 2015 some products were presented for the first time with the new CANopen-Lift demonstrators. These offer many advantages over the 'old' demonstrators. With the help of the flexyPage Displays installed there, sensor data can be displayed directly and the function of the products can be attractively demonstrated using multimedia elements. This concept was very well received by the visitors and will be further developed.
At the Interlift 2017 there was repeated feedback from visitors that the old demonstrators were no longer up to date and should be updated. The Marketing Group Lift has created a new concept and exhibited it for the first time at Interlift 2019.
At the Interlift 2019 again CANopen-Lift will be represented with its own booth to inform visitors about the standard CANopen-Lift. Since the last Interlift 2017 a lot has happened. The number of members has risen and plenty of new products have been equipped with a CANopen interface. This trend could also be observed on the Interlift 2017.
In 2015 for the first time some of the new products were presented with the new CANopen demonstrators. These offer many advantages over the ‘old’ demonstrators. With the help of the installed flexyPage displays, sensor data can be visualised directly and the function of the products can be displayed appealingly via multimedia elements. This concept was received very well by the visitors.
At Interlift 2017, visitors have repeatedly given feedback that the old demonstrators are outdated and should be updated. The Marketing Group Lift will discuss this in the upcoming meetings.
There will be many new and familiar CANopen products at the stands of many manufacturers. We provide a list in this wiki on time before the Interlift 2019.
Exhibitors of CANopen-Lift products at Interlift 2019
In the following table you will find an overview of the CiA member stands or stand with CANopen-Lift products.
- A: Exhibitors with their own stands at the Interlift
- P: A CANopen product is either being produced, developed or sold
- D: A product is shown at the demonstrator
- M: Member of CAN in Automation
- I: Here you receive information about CANopen-Lift