CAN I/O-Board CLK-02: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
[[Böhnke & Partner GmbH|Böhnke + Partner GmbH]] | [[Böhnke & Partner GmbH|Böhnke + Partner GmbH]] | ||
= | = Profile = | ||
CiA-417 | CiA-417 | ||
= | = Port = | ||
* Transceiver | * Transceiver according to ISO 11898 (dielectric strength bus line +/- 30 V) | ||
* | * Bit rate and timing according to CiA-301 | ||
* | * galvanically isolated | ||
* Autobaud | * Autobaud | ||
* | * Plug: | ||
** D-Sub 9-Pin | ** D-Sub 9-Pin | ||
** Open Style | ** Open Style three poles | ||
* NodeID 12 ( | * NodeID 12 (parametrizable) | ||
* | * two status LEDs according to CiA-303-3 | ||
* | * Software update via CANopen port possible | ||
* | * Termination with switch at the board | ||
= | = Description = | ||
The CLK-02 serves to process all car signals of a lift. It provides 16 inputs, 8 calls, 8 outputs and 7 relay outputs. It is expandable with the board CLE-01 for additional 32 terminals each. The CAN bus will be made available at the open style terminal and a socket D-sub 9-Pin to connect other components. | |||
= Status = | = Status = | ||
Deliverable | |||
= Verified = | = Verified = | ||
[[ | [[Image:Logo_CANopen-Lift_verified.png|thumb|Logo für verifizierte Geräte]] | ||
Die Funktionalität der Baugruppe wurde erfolgreich bei den folgenden [[CANopen_Lift_Plugfest|PlugFesten]] geprüft: | Die Funktionalität der Baugruppe wurde erfolgreich bei den folgenden [[CANopen_Lift_Plugfest|PlugFesten]] geprüft: | ||
* [[CANopen_Lift_Plugfest_-_2010-09-30|drittes PlugFest CANopen-Lift 2010]] | * [[CANopen_Lift_Plugfest_-_2010-09-30|drittes PlugFest CANopen-Lift 2010]] |
Revision as of 10:29, 29 September 2014
Manufacturer
Profile
CiA-417
Port
- Transceiver according to ISO 11898 (dielectric strength bus line +/- 30 V)
- Bit rate and timing according to CiA-301
- galvanically isolated
- Autobaud
- Plug:
- D-Sub 9-Pin
- Open Style three poles
- NodeID 12 (parametrizable)
- two status LEDs according to CiA-303-3
- Software update via CANopen port possible
- Termination with switch at the board
Description
The CLK-02 serves to process all car signals of a lift. It provides 16 inputs, 8 calls, 8 outputs and 7 relay outputs. It is expandable with the board CLE-01 for additional 32 terminals each. The CAN bus will be made available at the open style terminal and a socket D-sub 9-Pin to connect other components.
Status
Deliverable
Verified
Die Funktionalität der Baugruppe wurde erfolgreich bei den folgenden PlugFesten geprüft:
Bild
400px|Baugruppe CLK-02 für den Einsatz auf der Kabine eines Aufzugs