Information on the General Data Protection Regulation GDPR
On May 25, 2018, the transitional period of the new EU-DSGVO and the BDSG expired and thus they became binding and must also be used in this wiki.
If you want to register for this wiki and want to post or comment on this wiki, then you must agree to the storage of your personal data.
Welcome to CANopen-Lift.org
This wiki is about the CANopen technology used in a lift. Here we discuss the topics application profile, technical solutions, products and applications and we will present some references with this technology.
This wiki is attended by the CANopen-Lift community, the members of the SIG Lift and of the MG Lift. You are cordially invited to add your own content to this subject. If you do don't know how to do this refer to our tutorial.
You can find an overview over this wiki in the Community portal or in the Site categories.
Currently, this wiki is biliterate. In year 2002 we began with a German website and in year 2005 with a German wiki. CANopen's increasing awareness in more and more countries all over the world brought us to the decision of setting up an English wiki, too, in order to meet the demand of information. At this time you will find most of the information only on the German part of this wiki but we are working hard on translating. If you liked to help us, contact the Webmin, please.
We hope you enjoy your visit and draw inspiration from this wiki.
In the period from 15th to 18th October 2019 the world's largest trade fair for elevator technology Interlift 2019 took place in Augsburg/Germany.
The CiA was present there once again. They informed about CANopen-Lift and presented the new CANopen-Lift demonstrator to show the wide range of available CANopen-Lift devices.
Model lift system with CANopen components
The Heilbronn University started a a research project, that aims at various aspects of the automation of elevators with CANopen, such as compliance testing "in the loop" and the possibilities of telemetry and remote diagnostics.
The goal of the project is an elevator system model built in 1:10 scale and controlled via original CANopen components.