Mini-Fit Jr. 6 Pins: Difference between revisions
Jump to navigation
Jump to search
| Line 46: | Line 46: | ||
*[[Tableauknoten CANnode CN16]] | *[[Tableauknoten CANnode CN16]] | ||
*[[Ruftableauknoten CANsmall CS08]] | *[[Ruftableauknoten CANsmall CS08]] | ||
Currently some of these devices use the [[Mini-Fit Jr. 4 Pins]] | Currently some of these devices use the [[Mini-Fit Jr. 4 Pins]] | ||
[[Category: Recommendations]] | [[Category: Recommendations]] | ||
Revision as of 09:15, 4 October 2016
In the CANopen-Standard (CiA-303-1) the allocation of the most common plug connections are standardized. In the application profile for lifts there are recommendation for several plugs for lift components.
Pin-Allocation Plug Mini-Fit Jr.
| Pin | Signal | Description |
| 1 | (CAN_SHLD) | optional shield |
| 2 | CAN_H | CAN bus signal (dominant high) |
| 3 | CAN_L | CAN bus signal (dominant low) |
| 4 | CAN_GND | CAN ground |
| 5 | (GND) | optional ground power supply (of Pin 6) |
| 6 | (CAN_V+) | optional external power supply (+24 V) |
Applications
This plug was used by the following devices:
Currently some of these devices use the Mini-Fit Jr. 4 Pins