Product Guide: Difference between revisions
| Line 79: | Line 79: | ||
<br> | <br> | ||
==[[THOR NX-T]]== | ==[[Controller THOR NX-T]]== | ||
[[File:THOR v2.png|right|128px]] | [[File:THOR v2.png|right|128px]] | ||
Using a touch-based graphical interface, THOR NX-T is equipped with all the features lift technicians might need from a lift controller – giving users macro control of their lift system and preparing it for the years to come. | Using a touch-based graphical interface, THOR NX-T is equipped with all the features lift technicians might need from a lift controller – giving users macro control of their lift system and preparing it for the years to come. | ||
[[THOR NX-T|read more ...]] | [[Controller THOR NX-T|read more ...]] | ||
<br> | <br> | ||
<br> | <br> | ||
Latest revision as of 10:44, 12 December 2023
Lift ControllerController ASP116 Evolution The lift controller system ASP116 Evolution has two CANopen-interfaces based at the CiA-417 application profile. You can use it for lifts with up to 32 floors. Controller bp119 The lift controller system bp119 has two CANopen-interfaces based at the CiA-417 application profile. You can use it for lifts with up to 64 floors. Controller bp308 The lift controller system bp308 has two CANopen-interfaces based at the CiA-417 application profile. You can use it for lifts with up to 127 floors. Controller bp408 The lift controller system bp408 has two CANopen-interfaces based at the CiA-417 application profile. You can use it for lifts with up to 64 floors. Controller IXXAT Econ 100 Stand-alone embedded PC for DIN rail mounting suitable for many applications. The basic version of the device has each two Ethernet, CAN and USB interfaces. Expansion of interfaces and functionality can be achieved by using the expansion interface or the on-board FPGA. The unique modular concept of the IXXAT Econ 100 enables to easily extend the existing interfaces and functions, allowing to adapt the device to your specific requirements. Customized gateway and control solutions can therefore be swiftly and easily implemented for a variety of different fieldbus and industrial Ethernet standards. Controller MLC-8000 The liftcontroller MLC-8000 can be used with cost-intensive and with high-tech-elevators and covers all kind of drives. Some of the highlights are:
Controller MPK411 The MPK 411 control concept covers nearly the entire scope, including complex elevator facilities of up to 10 units serving maximally 100 floors and high travelling speeds of up to 8 m/sec. Controller MSZ 9E The lift controller system MSZ 9E has one CANopen-interfaces based at the CiA-417 application profile. Controller THOR NX-T Using a touch-based graphical interface, THOR NX-T is equipped with all the features lift technicians might need from a lift controller – giving users macro control of their lift system and preparing it for the years to come. Controller WE1 The modern, flexible and modular control system with the best price-performance
Controller WE408 The WE408 is the chameleon among the elevator controls. It fits perfectly into the technical environment and leaves no wish unfulfilled.
Controller WEBIT-C2 Easy to use and comfortable as the big ones are the advantages of WEBIT-C2. Modern, robust, simple, designed for lift manufacturers who prefer a control with conventional shaft wiring. Controller Genius20 Genius20 is a lift controller developed by KLEEMANN. Developed for the global lift market, the Genius20 controller includes all necessary parameters and functions for all lift installations. It supports both traction and hydraulic lifts.
NetworkCAN Bridges & Gateways The use of bridges and gateways opens up a large number of configuration possibilities. For example, CAN systems can be implemented over a larger area, devices without CAN interfaces can be connected to CAN systems or CAN systems can be coupled using different technologies, such as Bluetooth, Ethernet or PROFINET. CAN PC Interfaces  CAN PC interfaces enable PC applications to access CAN networks with a unique variety of different PC interface standards. You select the PC interface - may it be an "internal" or "external" one - that suits your application, performance requirements or required unit costs. In addition to custom applications based on the VCI (Windows) or ECI (Real-time OS and Linux) drivers, the interfaces are also the basis for our extensive tool chain – consisting of analysis and configuration tools – as well as configuration software from a wide variety of equipment manufacturers. CAN remote gateway CDG-01 The board CDG-01 is available in different variations. It can be used for different assignments.
CAN Repeaters Repeaters for CAN and CAN-based higher layer protocols are used to establish a physical coupling of two or more segments of a CAN bus system. They can be used to implement tree or star topologies as well as for long drop lines. CAN serial interface CSI-01C The board CDG-01 is available in different variations. It can be used for different assignments.
ES-01 universal monitoring gateway - serial Universal monitoring gateway for different elevator brands. LCL-01 Universal Gateway With the integrated interfaces LAN, USB, CAN, LIN and RS485 the Universal Gateway LCL-01-Lift is the ideal hardware for use in elevators and escalators. For this purpose it provides multiple protocols and applications. WIRELESS CAN
WIRELESS CANblue II The CANblue II is a reasonable and versatile CAN Bluetooth module, which can be used in a wide range of applications due three supported operation modes:
WIRELESS SMART CAN
WIRELESS THR CAN
Car Position SensorsAbsolut position encoder GXP5W
Absolute Rotary Encoder CANopen Lift
Absolut multiturn position encoder CANLift Multiturn absolut psoition encoder seria 5868/88 The CANLift-encoder from serias 5868/88 supports the latest CANopen communication-profil of CiA-301 V4.02. Additional is the unit-specific profile CiA-417 V1.1 (for liftapplications) adopted. ANTS Encoder The ANTS ENCODER (short ANTS) is an ingeniously simple system that is able to inform you at all times about the absolute positioning of the elevator. Shaft encoding WDGMSM Digital shaft encoding quiet and without slippage
LIMAX2 Linear Shaft Encoder LIMAX2 is an absolute measuring linear shaft information system which is used to measure the position of elevator cars. It consists of only two components: magnetic tape and the sensor. USP-30-CANopen Fitting and adjusting switches at floors for speed and creeping? Wiring of all switches? Programming of stop positions? This jobs belonged to the fitting of conventional positioning systems. Since USP is available you can forget this time-robbing works. ...
Load Measurement UnitsILC-CANopen ILC-CANopen is an excellent load weighing sensor with integrated electronics for CANopen from MICELECT. LM-CANopen LM-CANopen is an excellent electronic control unit with CANopen output compatible with all sensors manufactured by MICELECT.
OMEGA 12-C Unit control is a Load Weighing device of the (NG) New Generation units from Dinacell Electronic with CANopen-Lift CiA-417 integrated.
WeightWatcher AE12 CANopen The load measuring device AE12 CANopen is an overload measuring device which can monitor up to 12 ropes simultaneously and above all with absolute load specifications.
|
Drive UnitsADL300 For new installations and modernization ADL300 serie is the best response to the requirements of safety, comfort and reliability of the most sophisticated elevator systems. It offers the customer economic benefits both in terms of installation as well as when handling. COMBIVERT F5 Lift The frequency inverter COMBIVERT can drive not only conventional drives, but also support several field buses. About the clear text user panel provided in future also a CANopen Lift interface .
FB-20 The FB-20 and FB-22 series have been developed precisely for the special requirements of elevator constructions. The newest technology delivers particularly smooth and accurate movements, automatically distance calculation, optimal speed run floor to floor, allows time-saving direct drive-in and open loop. FB-22 The FB-20 and FB-22 series have been developed precisely for the special requirements of elevator constructions. The newest technology delivers particularly smooth and accurate movements, automatically distance calculation, optimal speed run floor to floor, allows time-saving direct drive-in and open loop.
MFR With the frequency inverters of MFR series of LiftEquip you get the latest technology without additional cost, as the recovery module is integrated in the inverter. The inverter can be used for both applications: geared and gearless.
Unidrive LFT Unidrive SP is the ideal drive for elevators and lifting platforms: i.e. of low noise level! With the optional application module SM Applications Plus or SM-Applications Lite V2 and the elevator-software of Control Techniques the Unidrive SP gives highest flexibility and is the ideal frequency inverter for the controlling of lift-motors. VLT Lift Drive LD302The VLT® Lift Drive is designed to provide reliable operation and excellent ride comfort for a minimum of 2.1 million cycles when running at an ambient temperature of below 45°C. Ideal for new projects or for retrofits, it operates without motor contractors and can be quickly and easily commissioned in less than 10 minutes. ZAdyn4 The ZAdyn4 is the result of consistent further development of the ZETADYN 3. The housing design and the compact construction makes the ZAdyn4 perfect for switch cabinet installation as well as for wall installation in the machine room or elevator shaft. The function Safe Torque Off (STO) enables a contactorless operation of the elevator motor without the disturbing switching noises.
Door Drive UnitsDoor Controller ECO+ ECO+ door drives are used for low and mid duty elevators. The Drive can move panel masses up to 130kg complete door package weight. Door controller MiDrive Door controller MiDrive for the door drives M 200 CAN, M400 CAN and M 800 CAN. Door controller TSG V4-CANopen LiftThere are different versions of TSG V4. Once, it can be used for doors with a maximum weight of 200kg and once with a maximum of 400kg.
Input/Output UnitsCAN-Adapter-Platine CAP-01 The CAP-01 has 8 terminals (I/O) and contains the vituals units »Input Panel Unit« and »Output Panel Unit«. So any input signals can be read in and sent the input-function on the CAN-bus or resp. as output signals issued for up to 8 liftcontrollers at the outputs.
CANio modules With its CANio 250 and CANio 500 HMS offers two universal I/O gateways for CAN and CANopen systems which enable the easy and quick connection of digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles. Besides the standard version with aluminum housing, HMS offers customer specific variants. CAN-Leistungs-Platine CLK-01 The CLK-01 is used for signal processing of all carsignals of an elevator. It provides 16 inputs and 2 relay outputs. It is extendable by each 32 callterminals using the board CLE-01. The CAN-bus appropriates terminals, RJ45-socket and D-Sub with 9 contacts to connect further components. CAN-Leistungs-Platine CLK-02 The CLK-02 is used for signal processing of all carsignals of an elevator. It provides 16 inputs and 2 relay outputs. It is extendable by each 32 callterminals using the board CLE-01. The CAN-bus appropriates terminals, RJ45-socket and D-Sub with 9 contacts to connect further components. CLI-01 input output module The module CLI-01 has 8 call terminals (input and output terminals) and includes the virtual devices Input Panel Unit and Output Panel Unit. Thus any input signal can be read and provided as an input function on the CAN bus and output signals are output from the bus. Lift I/O Module LIO-350-20 Lift I/O-Module LIO-350-20 offers you:
Panel UnitsCAN-Adapter-Platine CAP-01The CAP-01 has 8 terminals (I/O) and contains the vituals units »Input Panel Unit« and »Output Panel Unit«. So any input signals can be read in and sent the input-function on the CAN-bus or resp. as output signals issued for up to 8 liftcontrollers at the outputs. CAN-Bus-Knoten cbk01 The CBK01 is used for signal processing of all signals from car- and landing-panels of an elevator. It has 8 inputs and 8 outputs for the connection of call-buttons or other operation- and signal-buttons of the panels. Additional there are two serial interfaces for the controlling of floor indicators or voice announcements of Kronenberg available. A signaler for the acustic acceptance is integrated. flexyPage Monitor Controller Boxed CAN R3 The flexyPage Boxed CAN R3 version provides the flexyPage functionality for external monitors, connected via DVI- or HDMI interface. So industrial monitors or standard TVs can be used with or without touch sensors. flexyPage Mediaplayer Boxed V4 The flexyPage Boxed V4 provides the flexyPage functionality for external monitors, connected via DVI- or HDMI interface. So industrial monitors or standard TVs can be used with or without touch sensors. flexyPage LT-Line The LT-Line open-frame displays are designed for rear mounting. All LT-Line displays possess industrial TFT displays with an energy-saving LED backlight and a long life time and are designed for 24/7 operation. flexyPage DM-Line Our panel-mount displays of DM-Line have been developed for front mounting or installation in a wall. The display counts with a safety glass. The display is equipped with a PCT touch sensor and can optionally be supplied without touch. All displays of DM-Line are equipped with an energy-saving LED backlight with a lifetime of 50,000 hours and are designed for 24/7 operation. flexyPage V-Line The V-Line panel-mount touch displays have been developed for COPs and landing panels. The displays are equipped with a PCT touch sensor. All V-Line displays are equipped with an energy-saving LED backlight with a lifetime of 50,000 hours and are designed for 24/7 operation. Floor Indicator FD4-CAN The FD4-CAN floor display offers an integrated voice announcer, which runs via the CANopen Lift bus system. The unit presents floors, fixed maintenance messages, and direction arrows through text and sound and it supports an arrival chime. Lift Hall Call Module LHC-350-20 Lift Hall Call Module LHC-350-20 offers you:
Lift Fire Module LFM-350-20 Lift Fire Module LFM-350-20 offers you:
Lift Car Call Module LCC-350-20 Lift Car Call Module LCC-350-20 offers you:
Lift Car Call Module LCC-320-20 Lift Car Call Module LCC-320-20 offers you:
Lift Display Module LDM-050-xx
Lift Display Unit LDU-350-xx
Hall Panel Node CANsmall CS08 The CANsmall CS08 has 8 I/O terminals, 8 output terminals and contains the following virtual devices: Input Panel Unit and Output Panel Unit. The I/O terminals can be used for the calls, inputs- and outputs. So any input signal can be read in and sent to the CAN Bus as input-function. Panel Node CANnode CN16 The CANnode CN16 has 8 I/O terminals, 8 output terminals and contains the following virtual devices: Input Panel Unit and Output Panel Unit. The I/O terminals can be used for the calls and the output terminals as pure outputs.
ToolsCANalyzer.CANopenCANalyzer’s functionality together with the functional expansions for CANopen gives the user a tool that can be used both in the development of CANopen systems as well as their startup and maintenance. canAnalyser CANoe.CANopenCANoe.CANopen coupled with the project planning tool called ProCANopen (included in delivery) enables efficient planning, management, simulation, test, and startup of CANopen networks. CANopen Device Manager CANopen Device Monitor The CANopen Device Monitor of port is for the graphical inspection and configuration of CANopen units in the CANopen network. The integrated script ability permits, beside the access to the implemented CANopen-services, the performence of controler jobs in the network and the realisation of test- and controlapplications with little effort. CANopen Design Tool and Protocol Stack The CANopen Design Tool of port industrial automation GmbH serves the menu driven complete building of CANopen-object indexes. Together with the protocol-stack, which is available as version 4.4 and always maintained to the latest CiA-standards, CANopen-units can be created by configuration on this way. It originates a loadable C-code and a unit-description in XML (*.xdd) and in EDS-format. CANopen Source Code The CANopen Source Code (CANopen Stack) contains CANopen services required for an implementation. It thus offers the user the communication functionality required for internal device development. CANwizard The software CANwizard you can use to configure and diagnostic CANopen-networks. It provides different features as well for the application profile CiA-417 for the configuration of elevators. CANwizard CS08 The Aktiv X Control panel CANwizard_CS08 is a visual operator interface which is based on the platform CANwizard of Böhnke + Partner GmbH. This control panel makes it possible to configurate the Hall Panel Node CANsmall CS08 of SCHAEFER GmbH with no special knowledge of the CANopen system. CANwizard CN16 The Aktiv X Control panel CANwizard_CN16 is a visual operator interface which is based on the platform CANwizard of Böhnke + Partner GmbH. This control panel makes it possible to configurate the Panel Node CANnode CN16 of SCHAEFER GmbH with no special knowledge of the CANopen system.
AccessoriesCAN-BUS Accessories
|